AIRTRONICS M12 Guía de usuario descargar pdf (Pagina 94)



CH-SET

PG. 94

PAGE #

MENU DESCRIPTION

Adjust Programming Values for Common Functions in One Convenient Location

The following Programming Menus are available within the CUSTOM menu:

To access the CUSTOM menu, turn the transmitter ON, then press the SELECT

switch to highlight the CUSTOM menu.

Press the ENTER key to open the CUSTOM menu. The CUSTOM menu features

the CH-SET menu and any other favorite Programming Menus you've added.

Scroll UP or DOWN to highlight the desired Programming Menu, then press the

ENTER key to open that menu.

 

The CH-SET menu allows you to make a number of common function Programming Value changes to all four channels without

the need to enter each of those function's Programming Menus separately. For example, you can make all of your desired

Programming Value choices for functions such as End Point Adjustment, Exponential, Curves, Servo Speed, Fail Safe settings and

more for each channel, all from within the same menu.

If Racing Mode is turned ON and if you've chosen to program one or more Racing Mode functions separately, a Racing Mode

Icon will be displayed next to the function Programming Value to indicate which Racing Mode you're currently programming the

function for. For more information, see the

R-MODE Menu

section on pages 75 ~ 76.

This section details how to use the CH-SET menu. For information about programming each of the Programming Menus

within the CH-SET menu, refer to the specific Programming Menu sections detailed previously.











Choosing the Channel:

1) From within the CUSTOM menu, scroll UP or DOWN to highlight the CH-SET

menu.

2) Press the ENTER key open the CH-SET menu. The < ST > channel will be

Selected.

3) Press the SELECT switch RIGHT or LEFT to choose the desired channel you

would like to change function Programming Values for.

Channels and function Programming Values will vary depending on the

current Car Type.

Changing Function Programming Values:

1) After selecting the desired channel, scroll UP or DOWN to highlight the function

Programming Value you would like to change.

2) Press the ENTER key, then scroll UP or DOWN to choose the Selected func-

tion Programming Value.

3) Press the ENTER key, then repeat steps 1 and 2 to change any other desired

function Programming Values.

Certain function Programming Values may not be displayed in the CH-SET menu because they haven't been Selected in

the specific function's Programming Menu. For example, the CURVE EXP function Programming Value may be displayed

in the CH-SET menu, but if you want to change the CURVE ARC function through the CH-SET menu, you will need to first choose

the ARC function in the CURVE menu first. The CURVE ARC function Programming Value will then be able to changed through

the CH-SET menu.

Function Programming Values changed from within the CH-SET menu are duplicated in the specific function's Programming

Menu and vice-versa.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 115 116

Comentarios a estos manuales

Sin comentarios

AIRTRONICS M12 Guía de usuario Pagina 94

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos AIRTRONICS M12