AIRTRONICS M12 Guía de usuario descargar pdf (Pagina 30)













Changing Direct Model Select Models:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the DMS

menu.

3) Press the ENTER key, then scroll UP or DOWN to choose the Model Name you

want to be controlled by that particular Direct Model Select switch.

4) Repeat step 3 to Assign any other desired Models to the remaining Direct

Model Select Switches.











The BIND menu allows you to change the transmitter's Modulation Type, turn the Telemetry function ON and OFF, Assign a Safety

Link Number to your Model, change the Servo Operating Mode and Bind the transmitter and receiver pair. All settings are

Model-specific, so you can have different settings to suit different Models.

The Modulation Type and Safety Link Number must be chosen prior to Binding the transmitter and receiver. If these options

are changed after Binding, you will need to re-Bind the transmitter and receiver pair.

Make sure the Modulation Type you choose matches the Modulation Type of the receiver you're using!

Changing the Modulation Type:

The Modulation Type function allows you to choose the transmitter Modulation Type. The Modulation Type should be changed

to match the receiver you're using. For example, if you use an Airtronics 2.4GHz FH3 surface receiver with your transmitter, you

would need to change the Modulation Type to FH3. The Modulation Type should be chosen prior to Binding the transmitter and

receiver pair.

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the BIND

menu.

2) Press the ENTER key to open the BIND menu. MODULATION > FH4T will be

highlighted.

3) Press the ENTER key, then scroll UP or DOWN to Select the desired Modulation

Type.

2) Press the ENTER key to open the DMS menu, then scroll UP or DOWN to

highlight the Model Name adjacent to the DMS number you would like to

change.

SELECT switch LEFT controls DMS1, SELECT switch RIGHT controls DMS2

and the BACK key controls DMS3.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 115 116

Sin comentarios

AIRTRONICS M12 Guía de usuario Pagina 30