AIRTRONICS M12 Guía de usuario descargar pdf (Pagina 58)













The PCLINK menu allows you to Save the current Telemetry Data Log to your PC for viewing at a later date. Once a Telelmetry Data

Log is Saved to your PC, the data can be read using a spreadsheet program, such as Microsoft Excel. In addition, the PC

LINK menu

allows you to Save Model Programming Data to your PC, Load saved Model Programming Data from your PC, and use your PC

to update the M12 transmitter's Firmware.

To use these functions, a Mini USB cable and PC-Link Manager software will be required. Visit http://www.airtronics.net to

download the PC-Link Manager software and check for Firmware updates. A Mini USB cable should be available from any

retail store that sells PC accessories.

Saving the Telemetry Data Log:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the PC

LINK

menu.

2) Press the ENTER key to open the PCLINK menu, then scroll UP or DOWN to

highlight the SAVELOG menu.



The Save Log function allows you to Save the current Telemetry Data Log for viewing or archiving on your PC. The Telemetry Data

Recording function records Telemetry Data when the Lap Timer is Started. When the Lap Timer is Stopped, Telemetry Recording

is also Stopped. One Telemetry Data Log is kept in memory at a time and will be available for viewing even after the transmitter

is turned OFF. When the Lap Timer is Started again, the current Telemetry Data Log will be erased and a new one Started. If you

want to Save the current Telemetry Data Log, follow the steps in this section.

7) Click the Start button on the PC-Link Manager software and allow the Data Transfer to complete. Once completed, EXECUTED

will be displayed on the M12 and The Operation Was Completed will be displayed on your PC.

IMPORTANT: Before proceeding, make sure that the transmitter is turned ON and connected to your PC, and that the PC-Link

Manager software is installed on your PC and running. For more information, refer to the User's Guide included with the PC-Link

Manager software.

3) Click the LOG SAVE TX > PC button on the PC-Link Manager software.

4) Navigate to the folder you would like to save the Telemetry Data Log to, then type a name for the file and click the Save button.

Do not click the Start button on the PC-Link Manager software yet.

5) Press the ENTER key. PC RECEIVE LOG SAVE OK? NO/YES will be displayed.

6) Scroll UP or DOWN to highlight YES, then press the ENTER key. PC START will

be displayed.

If you want to go back or if you don't want to Save the Telemetry Data Log

for any reason, choose NO or press the BACK key.



The Model Save function allows you to Save the currently Selected Model's Programming Data to your PC, either for archiving or

for sharing with other M12 users. For example, you can Save your current Model's Programming Data to your PC, then share the file

with a friend or fellow driver. They can then upload that Programming Data to their M12 transmitter using the Model Load function.

Only the currently Selected Model's Programming Data will be Saved. To Save the Programming Data for a different

Model, you must Select that Model first, using Model Select function. For more information, see the

Model Select

section

on pages 25 ~ 26.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 115 116

Comentarios a estos manuales

Sin comentarios

AIRTRONICS M12 Guía de usuario Pagina 58

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos AIRTRONICS M12