AIRTRONICS M12 Guía de usuario descargar pdf (Pagina 60)













Loading Model Programming Data, Continued....

3) Click the MODEL LOAD PC > TX button on the PC-Link Manager software.

4) Navigate to the folder where your Saved Model File is, then Select the file and click the Open button. Do not click the Start button

on the PC-Link Manager software yet.

7) Click the Start button on the PC-Link Manager software and allow the Data Transfer to complete. Once completed, EXECUTED

will be displayed on the M12 and The Operation Was Completed will be displayed on your PC.

5) Press the ENTER key. PC TRANSMIT MODEL LOAD OK? NO/YES will be

displayed.

6) Scroll UP or DOWN to highlight YES, then press the ENTER key. PC START will

be displayed.

If you want to go back or if you don't want to Load the Model Programming

Data for any reason, choose NO or press the BACK key.



The Update function allows you to Update the transmitter's Firmware to the latest version available. This allows you to keep your

transmitter up to date with any future programming feature upgrades or additions. The Firmware version that your transmitter is

currently running is shown in the INFORMATION menu. For more information, see the

INFORMATION Menu

section on page 61.

Before proceeding, download and save the latest Firmware version to a convenient location on your PC. Updates (when

available) can be downloaded from our website at http://www.airtronics.net.

Updating the Transmitter Firmware Version:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the PC

LINK

menu.

2) Press the ENTER key to open the PCLINK menu, then scroll UP or DOWN to

highlight the UPDATE menu.

WARNING: The Update process will take approximately 5 to 10 minutes. Make sure that before starting the Update process

that the transmitter's battery voltage is sufficient to complete the Update process. Once started, DO NOT STOP the Update

process and DO NOT unplug the transmitter from your PC!

3) Click the SOFTWARE UPDATE button on the PC-Link Manager software.

4) Navigate to the folder where you Saved the new Firmware version, then Select the file and click the Open button. Do not click the

Start button on the PC-Link Manager software yet.

7) Click the Start button on the PC-Link Manager software and allow the Update process to complete. Once completed, The

Operation Was Completed will be displayed on your PC and transmitter will Reset. Turn the transmitter OFF, unplug the Mini

USB cable from the transmitter, then turn the transmitter back ON to finalize the Update process.

5) Press the ENTER key. PC TRANSMIT UPDATE OK? NO/YES will be displayed.

6) Scroll UP or DOWN to highlight YES, then press the ENTER key. PC START will

be displayed.

If you want to go back or if you don't want to Update the Firmware version

for any reason, choose NO or press the BACK key.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 115 116

Comentarios a estos manuales

Sin comentarios

AIRTRONICS M12 Guía de usuario Pagina 60

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos AIRTRONICS M12