AIRTRONICS M12 Guía de usuario descargar pdf (Pagina 48)



For information about using an optional Telemetry receiver with your M12 transmitter, plugging the Telemetry Sensors into

your receiver and installing them into your Model, see the

Telemetry Connections and Mounting

section on pages 96 ~ 97.











The LOG SETUP menu allows you to turn Telemetry Recording ON and OFF and configure how Telemetry Data is displayed on

the TELEMETRY screen. For example, you are able to change the Telemetry Temperature reading from Fahrenheit to Celsius,

change the values at which the different Telemetry Sensor alarms sound, change how Speed and RPM are displayed and

much more.

In addition, when only the DISPLAY is turned ON using the DISPLAY key, the M12 can be placed in Receiver Mode, allowing it to

Bind with another Airtronics FH3 or FH4T transmitter and read Telemetry Data from it. For example, if using an FH4T transmitter

like the MT-4, MT-4 Telemetry Data can be viewed on the M12 TELEMETRY screen, or, if using an FH3 transmitter like the MX-3X

or M11X that doesn't support Telemetry, Steering and Throttle Output Data can still be viewed on the M12 TELEMETRY screen.

This capability allows the M12 to be used as a separate Telemetry Viewer and Recorder, much like the Airtronics TLS-01

Telemetry Logger.

For information about saving Telemetry Data to a PC, see the

LINK

section on page 58. For information about using the

TELEMETRY screen and viewing Telemetry Data, see the

TELEMETRY Screen Overview

section on pages 21 ~ 22.

Turning Telemetry Data Recording ON and OFF:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the LOG SETUP

menu.

2) Press the ENTER key to open the LOG SETUP menu, then scroll UP or DOWN

to highlight the REC menu.



The Telemetry Data Recording function records Telemetry Data when the Lap Timer is Started. When the Lap Timer is Stopped,

Telemetry Recording is also Stopped. One Telemetry Data Log is kept in memory at a time and will be available for viewing even

after the transmitter is turned OFF. When the Lap Timer is Started again, the current Telemetry Data Log will be erased and a new

one Started. If you want to Save the current Telemetry Data Log, use the Save Log option in the PC

LINK menu.

IMPORTANT: Full Telemetry integration requires the use of an Airtronics RX-461, RX-462 or other Airtronics FH4T Telemetry

receiver (available separately), although Throttle and Steering Output Data can still be viewed on the TELEMETRY screen and

recorded if using an FH2, FH3 or FH4 receiver.

3) Press the ENTER key to open the REC menu. REC > ON will be highlighted.

4) Scroll UP or DOWN to choose the desired Record value, either ON or OFF.

When ON is chosen, Telemetry Data will be Recorded. When OFF is chosen,

Telemetry Data will not be Recorded.

REC setting range is ON or OFF. The default setting is ON.



The RPM menu allows you to change the way RPM and Speed information is displayed on the TELEMETRY screen ALL and RPM

pages. For example, you can choose to display RPMs, MPH or KM/H. The RPM Gauge and the RPM Digital Display names will

even change from RPM to MPH or KM/H depending on the RPM Unit value chosen. On top of that, you can choose the Maximum

Telemetry Data values that are displayed and the RPM sensor can be calibrated to ensure the most accurate RPM or speed in

MPH or KM/H is displayed for your specific Model.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 115 116

Comentarios a estos manuales

Sin comentarios

AIRTRONICS M12 Guía de usuario Pagina 48

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos AIRTRONICS M12