AIRTRONICS M12 Guía de usuario descargar pdf (Pagina 86)



When the Throttle Offset function is turned ON, [OFFST] ON will be momentarily displayed in a pop-up window, LED1 will flash

and an Audible Alarm will sound until the Throttle Offset function is turned OFF.

Changing the Position Percentage Value:

1) From within the RACING menu, scroll UP or DOWN to highlight the OFFSET

menu.

2) Press the ENTER key to open the OFFSET menu. OFFSET > OFF will be

highlighted.

3) Scroll UP or DOWN to highlight POSITION > 0%.

4) Press the ENTER key, then scroll UP or DOWN to choose the desired High

Side (H) or Brake Side (B) Position percentage value. The Position percentage

value determines the position the Throttle servo Neutral Point will shift to

when the Throttle Offset function is turned ON.

Turning the Throttle Offset Function ON and OFF:

1) From within the OFFSET menu, scroll UP or DOWN to highlight OFFSET > OFF.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Offset

value, either ON or OFF.

OFFSET setting range is ON and OFF. The default setting is OFF.

Remember, the Throttle Offset function can be turned ON and OFF using Push-Button Switch Sw1 without needing to

access the OFFSET menu.

POSITION setting range is H100% to B100%. The default setting is 0%.

Changing the Brake Lock Percentage Value:

When Car Type II, III, IV,VI or VII is Selected, the Brake Lock function can be programmed to apply Brake to keep your Model from

moving while the Throttle Offset Position is increased. If your Car Type features two separate Brake channels, such as Car Type

IV, the Brake Lock function percentage value will affect both Brake channels equally.

1) From within the OFFSET menu, scroll UP or DOWN to highlight BR-LOCK > OFF.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Brake

Lock percentage value. The Brake Lock percentage value determines the

position your separate Brake servo (or servos) will shift to when the Throttle

Offset function is turned ON.

BR-LOCK setting range is OFF and 0% to 100%. The default setting is OFF.











Throttle Offset Programming Values can be changed while you're driving by Assigning these functions to a Trim Switch, the

Auxiliary Dial or the Auxiliary Lever. For more information, see the

ASSIGN Menu

section on pages 33 ~ 38.

In the default configuration, Push-Button Switch Sw1 turns the Throttle Offset

function ON and OFF.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 115 116

Sin comentarios

AIRTRONICS M12 Guía de usuario Pagina 86