AIRTRONICS MT-4s Guía de usuario descargar pdf (Pagina 43)

T R



The Track Timers function features three different Timers. Timers are provided for measuring Lap Times, Interval Times, and

Countdown Times. Timers are displayed in the following format: 00:00.00 (Minutes:Seconds.1/100th of a Second). In the default

configuration, Push-Button Switch Sw2 controls the selected timer. The selected timer is also displayed on the Top Screen in

the following format: 00:00 (Minutes:Seconds).

Choosing the Timer Type:

1) From the Top Screen, press the ENTER key to open the Programming Menu list.

2) Scroll UP or DOWN to highlight the TIMER menu, then press the ENTER key. The TIMER

menu will be displayed and [TYPE] LAP will be highlighted.

3) Press the ENTER key, then scroll UP and DOWN to select the desired Timer Type.

Choose from LAP, INT (Interval) and DOWN (Countdown).

To program the Lap Timer function, see the Lap Timer section below. To program the Interval Timer function, see the Interval

Timer section on pages 44 and 45. To program the Countdown Timer function, see the Countdown Timer section on page 45.

PROGRAM











The Lap Timer function allows you to measure and record times for up to 99 laps. The number of laps completed is displayed in

the Timer menu, and when a lap is completed, the lap time is displayed momentarily on the Top Screen. An Alarm (Goal Time)

is featured that will sound when you reach your Goal Time and, if desired, the Interval Timer (Target Time) can be programmed

within the Lap Timer to alert you of your Target Time separately from your Goal Time.

Setting the Interval Timer (Target Time):

1) From within the TIMER menu, scroll DOWN to highlight [INT]:--.

2) Press the ENTER key, then scroll UP or DOWN to set the desired Interval Timer Minutes

value.

TIMER INT setting range is --:-- . -- to 99:59:99. The default setting is --:-- . -- (OFF). When the Lap Timer is counting up, an

audible double-tone will sound each time the Lap Timer reaches the Interval Timer value. For example, if you set the Interval

Timer for 30 Seconds, an audible double-tone will sound every 30 seconds.

3) To set the Interval Timer Seconds value, press the ENTER key, then scroll DOWN to

highlight --. Press the ENTER key a second time, then scroll UP and DOWN to set the

desired Interval Timer Seconds value.

4) To set the Interval Timer 1/100th Seconds value, press the ENTER key, then scroll DOWN

to highlight --. Press the ENTER key a second time, then scroll UP and DOWN to set the

desired Interval Timer 1/100th Seconds value.









Setting the Alarm (Goal Time):

1) From within the TIMER menu, scroll DOWN to highlight [ALRM] 05.

2) Press the ENTER key, then scroll UP or DOWN to set the desired Alarm Minutes value.

3) To set the Alarm Seconds value, press the ENTER key, then scroll DOWN to highlight 00.

Press the ENTER key a second time, then scroll UP and DOWN to set the desired Alarm

Seconds value.

TIMER ALRM setting range is 00:00 to 99:59. The default setting is 5:00 minutes. An audible tone will sound in 1 second

intervals 5 seconds before reaching the Goal Time. When the Goal Time is reached, a long audible tone will sound.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 87 88

Comentarios a estos manuales

Sin comentarios

AIRTRONICS MT-4s Guía de usuario Pagina 43

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos AIRTRONICS MT-4s