12
Moving the throttle trigger position does not affect the physical movement of the throttle trigger. Do not attempt to adjust
the throttle trigger position beyond the limits indicated by the Throttle Trigger Position Adjustment Indicator or damage
to the transmitter may result.
The position of the throttle trigger can be adjusted forward or backward to change the feel of the throttle trigger during use.
Some users may prefer the throttle trigger positioned farther forward and some users my prefer the throttle trigger positioned
farther back. It all depends on your personal preference.
A
B
To adjust the throttle trigger position, follow the step below:
1) To move the throttle trigger backward, use a # 1 philips head screwdriver
to turn the Throttle Trigger Position Adjustment Screw (A) counter-
clockwise. To move the throttle trigger forward, turn the Throttle Trigger
Position Adjustment Screw clockwise.
As you adjust the throttle trigger position, the Throttle Trigger Position
Adjustment Indicator (B) will move, indicating the current position of
the throttle trigger.
The angle of the throttle trigger can be adjusted right or left to change the feel of the throttle trigger during use. Some users may
prefer the throttle trigger straight while some users my prefer the throttle trigger angled toward the right or left. It all depends on
your personal preference. Throttle trigger adjustment plates are included to fine-tune the angle.
A
B
To adjust the throttle trigger angle, follow the steps below:
1) Use a # 1 philips head screwdriver to remove the throttle trigger mounting
screw (A) from the left side of the transmitter.
2) Use the tip of a modeling knife to carefully pop the trigger adjustment
plate (B) out of the transmitter.
3) Carefully press the desired trigger adjustment plate into the transmitter, making sure to orientate it in the direction you want
to angle the throttle trigger, then reinstall and tighten the throttle trigger mounting screw.
Included is an optional molded rubber grip that is shaped differently from the stock grip that's preinstalled on the transmitter.
The optional grip is larger and straight near the bottom, which some users may find more comfortable.
To install the optional grip, follow the steps below:
1) Remove the original grip from the handle by firmly pulling down on the
back of the grip (at the top), then by pulling the grip out along its front
edges.
2) To install the new grip, align the molded tabs in the grip with the matching
slots in the handle, then firmly push the molded tabs into the slots,
working your way around the grip until the edges of the grip are flush with
the handle.
A - Throttle Trigger Centered
(Stock)
B - Throttle Trigger Angled Slightly.
Angle Right or Left Depending on Orientation.
C - Throttle Trigger Angled More.
Angle Right or Left Depending on Orientation.
(24 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales