25
3) Press the ENTER key, then scroll UP or DOWN to increase or decrease the Stroke
percentage value. Increasing the Stroke percentage value will increase throttle servo
travel in the Brake direction and decreasing the Stroke percentage value will decrease
throttle servo travel in the Brake direction.
ALB STROKE setting range is OFF to 100%. The default setting is OFF.
Adjusting the Point Percentage Value:
The Point percentage value determines the position along the servo travel that the Anti-Lock Braking function Activates. For
example, if set to 80%, you will have Normal Braking from the Throttle Neutral Point to 79% of servo travel. At 80% of servo travel
and beyond, the Anti-Lock Braking function will Activate when turned ON.
1) From within the ALB menu, scroll DOWN to highlight POINT 80%. Press the ENTER key,
then scroll UP or DOWN to increase or decrease the Point percentage value. Increasing
the Point percentage value will cause the Anti-Lock Braking function to Activate later
and decreasing the Point percentage value will cause the Anti-Lock Braking function
to Activate sooner.
ALB POINT setting range is 5% to 100%. The default setting is 80%.
Adjusting the Release and Hold Values:
The Release and Hold values determine the speed at which the brake pulsates. By adjusting the Release and Hold values, you
can make the brake pulsate faster or slower. The Release value determines how quickly the Brake moves from Neutral to
the percentage value determined by the Stroke setting and the Hold value determines how quickly the Brake moves from the
Stroke setting to Neutral.
We recommend using equal Release and Hold values, although different values can be used to fine-tune how the Brake
pulsates. Using lower values make the Brake pulsate faster and using higher values make the Brake pulsate slower.
PROGRAM
1) From the Top Screen, press the ENTER key to open the Programming Menu list.
2) Scroll UP or DOWN to highlight the ALB menu, then press the ENTER key. The ALB
menu will be displayed and STROKE OFF will be highlighted.
1) From within the ALB menu, scroll DOWN to highlight RELEASE 0.03s. Press the ENTER
key, then scroll UP or DOWN to increase or decrease the Release value. Increasing the
Release value will cause the Brake to move from Neutral to the Stroke setting slower
and decreasing the Release value will cause the Brake to move from Neutral to the
Stroke setting faster.
ALB RELEASE setting range is 0.01s to 1.00s. The default setting is 0.03s.
2) From within the ALB menu, scroll DOWN to highlight HOLD 0.03s. Press the ENTER key,
then scroll UP or DOWN to increase or decrease the Hold value. Increasing the Hold
value will cause the Brake to move from the Stroke setting to the Neutral position slower
and decreasing the Hold value will cause the Brake to move from the Stroke setting to
the Neutral position slower.
ALB HOLD setting range is 0.01s to 1.00s. The default setting is 0.03s.
(24 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales