AIRTRONICS MT-4s Guía de usuario descargar pdf (Pagina 29)

T R



Choosing the Four Wheel Steering Function:

1) From the Top Screen, press the ENTER key to open the Programming Menu list.

2) Scroll UP or DOWN to highlight the SYSTEM menu, then press the ENTER key. Scroll

DOWN to highlight the AUX TYPE menu, then press the ENTER key.

3) Press the ENTER key, then scroll UP or DOWN to choose the AUX1:4WS MIX function.

PROGRAM











The Four Wheel Steering Mixing function allows you to use Auxiliary 1 Channel 3 as a second steering channel, allowing you

to use two separate steering servos for Front and Rear steering. The Four Wheel Steering Mixing function allows you to control

either the Front or Rear steering independently, or Mix the Front and Rear steering to have Parallel Four Wheel Steering or

Tandem Four Wheel Steering. Use one of the four Trim Switches or the Rotary Dial to cycle through the different Four Wheel

Steering options while you're driving. The Four Wheel Steering Mixing function can be toggled OFF and ON while you're driving

by assigning Auxiliary 1 to one of the two Push-Button Switches.









Choosing Four Wheel Steering Mixing Options:

1) From the Top Screen, press the ENTER key to open the Programming Menu list.

2) Scroll UP or DOWN to highlight the AUX1 menu, then press the ENTER key. The AUX1

4WS menu will be displayed and the last Steering option selected will be highlighted.

3) Scroll UP or DOWN to move the brackets to the Four Wheel Steering option you would

like to use, then press the ENTER key to highlight that option. The highlighted option is

now Active.

The following Four Wheel Steering Mixing options are available:

REAR Wheel Steering - When highlighted, only the Rear Steering will operate.

NORMAL (Parallel/Crab) Four Wheel Steering - When highlighted, both the Front

and Rear Steering will operate in Parallel.

FRONT Wheel Steering - When highlighted, only the Front Steering will operate.

REVERSE (Tandem) Four Wheel Steering - When highlighted, both the Front and

Rear Steering will operate in Tandem.

If the steering servos do not operate as described above, use the Servo Reversing function to change the direction that each

servo operates. For more information, see the Servo Reversing section on page 42.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 87 88

Sin comentarios

AIRTRONICS MT-4s Guía de usuario Pagina 29