AIRTRONICS MX-V Especificaciones descargar pdf (Pagina 21)

Page 21



Antenna: Transmits the signal from the transmitter to the receiver in the model.

Antenna Wire: The antenna wire receives the transmitter signal. The antenna wire should be installed through

a nylon tube (antenna tube) in the vertical position for the best reception.

Anti-Lock Braking: A function that makes it possible to achieve stable braking even on a slippery track. When the

brakes are applied, the throttle servo pulsates rapidly to achieve stable braking.

Auxiliary Channel 3 Switch: Controls Auxiliary Channel 3 High and Low servo travel.

Battery Compartment: Houses the 8 'AA' Alkaline batteries that power the transmitter.

Battery Eliminator Circuitry: A circuit typically found in an electronic speed control that eliminates the need for

a separate receiver battery by using the battery pack that powers the model to also power the receiver and the

servos.

Binding: The act of pairing the transmitter and receiver to prevent interference from radio controllers operated by

other users.

Bind Button: Used in the process of Binding the transmitter and receiver.

Bind LED: Displays the current status of the transmitter and receiver pair.

Charging Jack: Used for onboard charging of the transmitter's optional Ni-Cd or Ni-MH batteries.

Channel Select Key: Used to select the specic channel you would like to make programming changes to.

Decrease Key: Used to decrease Programming Values.

Digital Trim Memory: Allows the transmitter to store trim values in its memory. Any amount of steering or throttle

trim that you set during use by pressing the trim switches is automatically stored in memory for that specic channel

and for that specic model number.

Dual Rate: Used to change the amount of steering and throttle servo travel relative to the physical movement of

the steering wheel and the throttle trigger.

End Point Adjustment: Allows you to adjust servo travel in each direction, making it possible to balance servo

travel in both directions.

Exponential: Used to vary the amount of servo travel in relation to the movement of the steering wheel and the

throttle trigger near the neutral positions to change the way the steering and throttle react to control movement.

Fail Safe: The Fail Safe function automatically sets the throttle servo to a predetermined position (usually idle or

brake) in the event that the signal between the transmitter and the receiver is interrupted, whether due to signal

degradation or to a low transmitter battery.

FHSS-2: Frequency Hopping Spread Spectrum 2nd-generation technology. FHSS is a modulation type which

transmits data across the entire frequency spectrum by transmitting data on different channels at an extremely

fast interval.

Grip: The transmitter's handle. The grip is molded in an ergonomic shape for increased comfort, control and feel.

Increase Key: Used to increase Programming Values.

Low Voltage Alarm: An audible alarm that sounds when the transmitter batteries reach a predetermined voltage

level.

Model Naming: Used to name the different models you have saved in the transmitter.

Model Select Key: Used to store and retrieve Programming Data for any model 0 through 9.

Multi-Function LCD: The heart of the programming and display features of the transmitter. All programming and

transmitter display functions are shown on the LCD.

Operating Voltage: The safe voltage that the transmitter or receiver can operate within. Exceeding the minimum

operating voltage can result in loss of power to the device(s). Exceeding the maximum operating voltage can result

in damage to the devices(s).

Output Power: The power (in Milliwatts) that your transmitter transmits a signal. Output power is dened by

government guidelines and differs by region.

Continued on Next Page



1 2 ... 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

AIRTRONICS MX-V Especificaciones Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos AIRTRONICS MX-V