AIRTRONICS MX-V Guía de usuario descargar pdf (Pagina 12)

V 3

CHANNEL 2.4GHZ RADIO SYSTEM USER'S GUIDE

EPA - END POINT ADjUSTMENT

2) Rotate the steering wheel to the left and release it. ST L should be displayed. Press

the INCREASE or DECREASE keys to increase or decrease the Steering Left End

Point Adjustment percentage value. Increasing the percentage value

will increase steering servo travel in that direction and decreasing the

percentage value will decrease steering servo travel in the that direction.

EPA ST L setting range is 0% to 150%. The default setting is 100%.

EPA ST R setting range is 0% to 150%. The default setting is 100%.

3) Rotate the steering wheel to the right and release it. ST R should be displayed.

Press the INCREASE or DECREASE keys to increase or decrease the Steering Right

End Point Adjustment percentage value. Increasing the percentage

value will increase steering servo travel in that direction and decreasing

the percentage value will decrease steering servo travel in the that direction.

1) Press the MENU UP or MENU DOWN keys to open the EPA menu. EPA will flash

and ST L or ST R 100% will be displayed.

Adjusting the Steering End Point Adjustment Percentage Values:

Your model’s turning radius can differ from left to right because of variations in linkage, suspension balance, tire diameter or

weight distribution. In such cases, Left Steering servo travel and Right Steering servo travel are adjustable using the End Point

Adjustment function.

Adjusting Throttle End Point Adjustment:

Your model's carburetor may not open completely or it may open too much and cause the throttle servo to bind. If you're using

an electronic speed control, the electronic speed control may not command full power or the brake may not engage adequately.

In such cases, Throttle Forward servo travel and Throttle Brake servo travel can be independently adjusted using the End Point

Adjustment function.

1) From within the EPA menu, press the MENU UP or MENU DOWN keys to display

TH F or TH B 100%.

2) Pull the throttle trigger and release it. TH F should be displayed. Press the

INCREASE

or DECREASE keys to increase or decrease the Throttle Forward End

Point Adjust

ment percentage value. Increasing the percentage value

will increase throttle servo travel in that direction and decreasing the

percentage value will decrease throttle servo travel in the that direction.

EPA TH F setting range is 0% to 150%. The default setting is 100%.

EPA TH B setting range is 0% to 150%. The default setting is 100%.

3) Push the throttle trigger and release it. TH B should be displayed. Press the

INCREASE or DECREASE keys to increase or decrease the Throttle Brake End Point

Adjustment percentage value. Increasing the percentage value will

increase throttle servo travel in that direction and decreasing the

percentage value will decrease throttle servo travel in the that direction.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Sin comentarios

AIRTRONICS MX-V Guía de usuario Pagina 12